In short: Alcohols are organic compounds with an −OH group, like ethanol. Hydrogen bonding gives them high boiling points, primary alcohols oxidise to aldehydes and then carboxylic acids, secondary alcohols oxidise to ketones, and tertiary alcohols do not oxidise.
The hydroxyl group
An alcohol has an −OH (hydroxyl) group bonded to a carbon. The general formula of the alkanols is .
Note: the −OH in an alcohol is not a hydroxide ion. Alcohols are neutral, not basic.
Primary, secondary and tertiary
Look at the carbon that holds the −OH. Count how many other carbons are bonded to it.
| Type | Carbons bonded to the C−OH carbon | Example |
|---|---|---|
| Primary (1°) | 1 (or 0 for methanol) | butan-1-ol |
| Secondary (2°) | 2 | butan-2-ol |
| Tertiary (3°) | 3 | 2-methylpropan-2-ol |
Physical properties
- Alcohols form hydrogen bonds (O−H). So they have much higher boiling points than alkanes of similar mass. Ethanol boils at 78 °C; propane (similar mass) at −42 °C.
- Small alcohols mix completely with water, because their −OH hydrogen bonds with water.
- As the carbon chain gets longer, the non-polar part grows, so solubility falls and boiling point rises.
Combustion
Alcohols burn cleanly with a blue flame:
The molar heat of combustion is the heat released when one mole burns completely in oxygen. It is always negative.
Measuring it with a spirit burner and a can of water:
- Weigh the spirit burner.
- Measure the water's mass and starting temperature.
- Burn the alcohol under the can, stirring, until the temperature rises about 20 °C.
- Reweigh the burner. The mass lost is the alcohol burnt.
Lab values are low because of heat lost to the air and the can, incomplete combustion (soot on the can), and alcohol evaporating from the wick. Using a draught shield, a lid, and a copper can close to the flame helps.
As alcohols get longer, each extra adds about 650 kJ/mol to .
Reactions of alcohols
| Reaction | Reagent and conditions | Product |
|---|---|---|
| Dehydration (elimination) | Concentrated , heat | Alkene + water |
| Substitution | HCl, HBr (or ) | Haloalkane + water |
| Oxidation | Acidified or , heat | Depends on type |
| Esterification | Carboxylic acid, conc. , reflux | Ester + water |
Dehydration is the reverse of hydration.
Oxidation
| Alcohol | Oxidised to | Colour of dichromate | Colour of permanganate |
|---|---|---|---|
| Primary | Aldehyde, then carboxylic acid | Orange → green | Purple → colourless |
| Secondary | Ketone | Orange → green | Purple → colourless |
| Tertiary | No reaction | Stays orange | Stays purple |
To stop a primary alcohol at the aldehyde, distil it off as it forms. To go all the way to the carboxylic acid, heat under reflux.
This gives a test: tertiary alcohols do not change the colour of acidified dichromate.
Making ethanol
| Fermentation | Hydration of ethene | |
|---|---|---|
| Raw material | Sugars from plants (renewable) | Ethene from crude oil (non-renewable) |
| Conditions | Yeast, warm (about 35 °C), no oxygen, water | Steam, acid catalyst, 300 °C, high pressure |
| Speed | Slow (batch) | Fast (continuous) |
| Purity | About 15% ethanol; must be distilled | Very pure |
Fermentation needs no oxygen, otherwise yeast makes and water instead. The mass of the flask drops as escapes, which lets you track the reaction.
Biofuels
Ethanol made from plants is a biofuel.
- For: renewable; the released was recently taken in by the growing plants; burns more cleanly; can be blended with petrol (E10).
- Against: less energy per gram than petrol (about 30 kJ/g compared with 47 kJ/g); uses farmland and water that could grow food; fertilisers, harvesting and distillation use fossil fuel energy; can absorb water and corrode engines.
- −OH hydroxyl
- 1°, 2°, 3°
- Hydrogen bonding
- High boiling points
- Small ones soluble
- ΔHc per mole
- q = mcΔT
- Heat loss, low results
- Dehydration: alkene
- Substitution: haloalkane
- Oxidation
- Esterification
- 1°: aldehyde, acid
- 2°: ketone
- 3°: none
- Fermentation
- Hydration of ethene
- Biofuel pros and cons
Quick summary
- Alcohols have an −OH group. Primary, secondary or tertiary depends on carbons attached to the C−OH carbon.
- Hydrogen bonding gives high boiling points and water solubility for small alcohols.
- ; lab values are low because of heat loss and incomplete combustion.
- Dehydration (conc. ) gives alkenes. HX gives haloalkanes.
- Oxidation: 1° → aldehyde → acid; 2° → ketone; 3° no reaction (dichromate stays orange).
- Ethanol is made by fermentation (renewable, slow) or hydration of ethene (fast, pure, from oil).
Quiz
Sign in to take the quiz
14 questions with instant marking. It is free, and your scores are saved to your account so you can carry on from any device.
Turn on JavaScript to sign in and take the quiz.
Try 3 questions now
The functional group in an alcohol is:
- A −OH (hydroxyl)
- B −COOH
- C −CHO
- D ion
Show answer
A: −OH (hydroxyl)
Alcohols have a hydroxyl group bonded to carbon.
Butan-2-ol is a:
- A Primary alcohol
- B Secondary alcohol
- C Tertiary alcohol
- D Carboxylic acid
Show answer
B: Secondary alcohol
The C−OH carbon is bonded to two other carbons.
2-methylpropan-2-ol is a:
- A Primary alcohol
- B Secondary alcohol
- C Tertiary alcohol
- D Ketone
Show answer
C: Tertiary alcohol
The C−OH carbon is bonded to three other carbons.